Electronic Load Image 1Description:

  • Current controlled / Voltage controlled
  • Two control methods:
  • manual – front panel Potentiometer setting visual front panel digital readout
  • remote – rear panel input signal (0 – 10 V) rear panel output Voltages for Current an Voltage (0 – 10 V)
  • Two operating ranges:
  • 20 A, 20 V capacity (400 W)
  • 100 A, 3 V capacity (300 W)
  • Two operating modes:
  • Current control
  • Voltage control
  • Balanced MOSFET circuit design
  • Excellent low Voltage operation
  • Accurate and repeatable

 

Specification:

Manual controls:
• load enable switch
• Current control / Voltage control switch
• (20 V / 20 A) / (3 V / 100 A) range switch
• 10 turn Potentiometer manual setpoint
Digital Current and Voltage display:
• 4,5 digit display
• Current: 10 mA resolution, 50 mA accuracy
• Voltage: 1 mV resolution, 1 mV accuracy
Rear panel input:
• Current 0 – 10 V for selected 0 – full scale range
• Voltage 0 – 10 V for selected 0 – full scale range
• input impedance 100 k Ohms
Rear panel output:
• Current 0 – 10 V for selected 0 – full scale range
• Voltage 0 – 10 V for selected 0 – full scale range
• output impedance 100 Ohms
Electrical accessories:
• 2 high flexibility, high Current leads
• 2 banana jack cell Voltage probes
• rear panel screw terminal for input / output
• frequency response to 10 kHz
Physical characteristics:
• Size (w x h x d): 19″ x 5,25″ x 13″ / 48 x 14 x 33 cm
• Weight: 10 lbs. / 4,5 kg
Electrical requirements:
• 110 V AC 5 A (or 220 V AC 2,5 A)

 

Electronic Load 1